MLCS Web Specials

Sign up for
the E-Club!

Your Account

NEW Products

Making Cabinetry

FREE Shipping

Current Catalogs

Product Reviews

Gift Certificates

MLCS Showroom












  • Straight Router Bits

  • Reviews

Two flute, single flute and European

1 or 2 flute, carbide tipped router bits. Will plane edges, cut grooves, rabbets, slots, and dadoes. Also used for mortising and carving, as well as other applications where a flat bottom is required. Items #5490-#5493, #7790-#7795 are designed for European metric size plywoods. See chart below for the undersize equivalency. Item #7794 is a 5/8" oversized bit for recessing shelf standards. Item #5468 is designed to be used for Sears dovetail jig. Item #7782 is an oversize cutter for Melamine.

Use #5479/#7779 for cutting dadoes for T-Tracks.

Use #7785 for cutting a groove for Miter T-Track.

The Advantage of TripleWing

Two Flute Straight
Item Triple Wing Large
Diam.
Cutting
Length
Shank
Size
Shank
Length
 
#5470 1/4" 3/4" 1/4" 1-1/4" $6.95
#5468 1/4" 1" 1/4" 1-1/4" $7.95
#5471 5/16" 1" 1/4" 1-1/4" $6.95
#5469 5/16" 1" 1/4" 1-7/8" $8.95
#5472 3/8" 1" 1/4" 1-1/4" $6.95
#5473 7/16" 1" 1/4" 1-1/4" $8.95
#5474 1/2" 1" 1/4" 1-1/4" $8.95
#5477 1/2" 1-1/2" 1/4" 1-1/4" $8.95
#5476 9/16" 1" 1/4" 1-1/4" $8.95
#5478 5/8" 1" 1/4" 1-1/4" $9.95
#5479 3/4" 1" 1/4" 1-1/4" $9.95
#7770 1/4" 3/4" 1/2" 1-1/2" $7.95
#7771 5/16" 1" 1/2" 1-1/2" $7.95
#7772 3/8" 1" 1/2" 1-1/2" $7.95
#7768 7/16" 1-1/4" 1/2" 2-1/8" $9.95
#7774 1/2" 1" 1/2" 1-1/2" $8.95
#10774 TW 1/2" 1" 1/2" 1-1/2" $13.00
#7777 1/2" 1-1/2" 1/2" 1-1/2" $9.95
#7775 1/2" 2" 1/2" 1-1/2" $12.95
#10775 TW 1/2" 2" 1/2" 1-1/2" $21.95
#7778 5/8" 1-1/2" 1/2" 1-1/2" $10.95
#7794 21/32" 3/4" 1/2" 1-1/2" $11.95
#7779 3/4" 1-1/2" 1/2" 1-1/2" $11.95
#10779 TW 3/4" 1-1/2" 1/2" 1-1/2" $16.00
#7782 25/32" 1-3/16" 1/2" 1-1/2" $12.95
#7780 7/8" 1-1/4" 1/2" 1-1/2" $13.95
#7781 1" 1-1/2" 1/2" 1-1/2" $14.95
#7785 1-1/4" 1-1/2" 1/2" 1-1/2" $17.95
#7784 1-3/8" 1-1/4" 1/2" 1-1/2" $17.95
#7786 1-1/2" 1-1/4" 1/2" 1-1/2" $19.95
#7787 2" 1-1/4" 1/2" 1-1/2" $30.95
Single Flute Straight
Item Large
Diam.
Cutting
Length
Shank
Size
Shank
Length
Price  
#5465 1/16" 1/4" 1/4" 1-1/4" $8.95
#5466 1/8" 1/2" 1/4" 1-1/4" $8.95
#5467 3/16" 1/2" 1/4" 1-1/4" $8.95
European Two Flute Straight
Item Triple Wing Large
Diam.
Cutting
Length
Shank
Size
Use for
Undersize
Price  
#5490 5.2mm
(13/64")
1/2" 1/4" 1/4" $7.95
#7790 5.2mm
(13/64")
1/2" 1/2" 1/4" $8.95
#7793 12.3mm
(31/64")
3/4" 1/2" 1/2" $9.95
#7795 18.2mm
(23/32")
3/4" 1/2" 3/4" $10.95
 MLCS Straight Router Bits

No rating yet... Be the first to rate this product!


all customer reviews and ratings

No rating yet... Be the first to rate this product!

  • Shear Angle Straight Router Bits

  • Reviews

The cutter angle slices smoothly
into stock!

NEW BITS! 2 flute, carbide tipped. The shear angle cutting flutes produces a smoother cut than traditional straight fluted bits. Instead of chopping at the wood fibers at a 90º angle, the shear angle design produces smoother shear angle, slicing cuts. Use this router bit to eliminate tear-out problems from routing end or cross grain on very hard woods.

Shear Angle Straight Router Bits
Item   Large
Diam.
Cutting
Length
Shank
Size
 
#5489   3/8" 3/4" 1/4" $9.95
#5483   1/2" 3/4" 1/4" $9.95
#7796 NEW! 5.2mm 3/4" 1/2" $9.95
#7788   1/4" 3/4" 1/2" $9.95
#7789   3/8" 1" 1/2" $9.95
#7797 NEW! 12.3mm 1" 1/2" $9.95
#7792   1/2" 1" 1/2" $9.95
#7783   1/2" 1-1/2" 1/2" $12.95
#7798 NEW! 18.2mm 1" 1/2" $12.95
#7791 NEW! 3/4" 1" 1/2" $12.95
#7799 NEW! 1" 1" 1/2" $15.95
Rated:

Review this product...

 MLCS Shear Angle Straight Router Bits

all customer reviews and ratings

Average Customer Rating: (1 reviews)
Add your own review for this product

Router Bit #5477 (5/5), Apr 1, 2020

By Jim Schneider (Jacksonville NC US)

I needed a router bit that could cut to 1 1/2Ē but I have a small Bosch router that uses a 1/4Ē shanks. Iíve looked high and low where I am in NC to no avail. I started looking online and MLCS was either first or second on the google search. These guys were one of two places I found that have what I needed. I ordered the straight 1/4Ē shank with an 1 1/2Ē cutting length and it arrived in 4 days. I gotta tell you, Iím very pleased with the bit. I used it to cut through oak, walnut and poplar so far. I cut a round 48Ē table using oak and the bit never quit. I also expected it to begin dulling about the time I finished with the oak. Boy was I wrong!! It cut into walnut just as smooth as the oak. I HIGHLY recommend anyone looking for a quality product to give MLCS a try for any of your woodworking needs.

Every time I use my router, I cut a 1/4Ē or less at a time and take your time. Let the bit cut and donít force it. You canít forget that or youíll end up thinking itís the productís fault and not your own. Remember the basics and you canít go wrong.

Thank you guys for your service.
Jim Schneider


Add your own review for this product