 |
 |
|||||||||
| Katana® Shear Angle Flush Trim Bits |
Katana® Jointmaker
3 Piece Set |
Katana® Flush/Trim Top
& Bottom Bearing Bits |
|||||||
|
|
|
|||||||
 |
|
|
|||||||
 Carbide tipped. The shear angle cutting flutes produce a smoother cut than straight flute bits. Eliminates tear-out when routing cross grain on hard woods. |
 |
3 piece, 1/2" shank, carbide tipped Lock Miter, Glue Joint, and Drawer Lock bit set in a beautiful wood storage box. |
 |
TWO BITS IN ONE! You can trim laminate on either side of substrate without changing bits or fllipping workpiece. 2 flute, carbide tipped. |
 |
||||
| more... | more... | ||||||||
|
|||||||||
| Katana® Core Box and Round Nose Bits |
Kitchen Door And Drawer Set with Undercutter
|
Katana® Vertical Raised Panel Router Bits
|
|||||||
|
|
|
|||||||
|
|
|
|||||||
|
Will plunge cut in soft or hard woods as well as composition materials. Use for reeding, fluting, veining, grooving and general ornamentation where a round bottom groove is desired. |
 |
This professional set contains five carbide tipped bits needed for cabinet making, raised panel doors, table tops and drawer assembly. Storage box included. |
 |
2 flute, carbide tipped. Choose from four classic profiles: an 18° straight bevel, cove curve, classic ogee, and the elegant ogee & bead. Use on 3/4" thick stock. |
 |
||||
| more... | more... | ||||||||
|
|||||||||
| Laminate Trim Bits with Euro™ Square Bearing |
3 Piece Plywood Straight Bit Set |
Matched Rail &Stile Set For Entry Doors |
|||||||
|
|
|
|||||||
|
|
|
|||||||
|
Specially designed 2 flute carbide tipped laminate trimming bits include the Euro™ Square Teflon bearing. Designed to slide on clean laminate edges. |
 |
2 flute, carbide tipped with bottom cutter insert for plunge cutting. These bits are designed for European metric size plywoods. |
 |
Carbide tipped rail and stile bits for making entry doors. These cutters come as a matched 2 piece bit set. Use for 1-3/8" stock (interior doors) or 1-3/4" stock (exterior doors). |
 |
||||
| more... | more... | ||||||||
|
|||||
| Ogee & Round Over Rail & Stile Sets |
Tongue & Groove V-Notch Set |
||||
|
|
||||
|
|
||||
|
Vesratile 3 -in-1 shaper cutters make rail and stile doors with both wood and glass panels, and tongue and groove joints. The cutters can be interchanged to accomplish the 3 different joints. |
 |
2 flute, carbide tipped with enclosed ball bearing guide. For producing interlocking tongue & groove with a V-groove on the face. Excellent for paneling or flooring. |
 |
||
| more... | |||||
